From a leaking tap to a room refresh, use these examples to explain what you need. Choose an enquiry below, then tell us your area, timing and budget. Mayfair will confirm the scope, availability and quotation.
These AI-generated images illustrate services and design ideas. They are not photographs of completed Mayfair projects or confirmed products for sale.
Repair work, explained.
Explore a typical problem, the work involved and the checks that help establish the next step. These are illustrated service examples.
Checking the accessible trap and waste connections beneath a kitchen sink. AI-generated service illustration; not a completed Mayfair job.
Example work, explained
Repairing a leak beneath the sink
See the problem, work and checks
The problem
Water appears in the cupboard after the sink is used. The leak could come from a waste joint, seal or a nearby supply connection.
The work involved
The plumber traces the source, checks the fitting and repairs or replaces the affected accessible component. Hidden pipework or damaged cabinetry is scoped separately.
Checks and next steps
Run and drain water through the sink, inspect the repaired connection and check for visible leaks before tidying the work area.
Need similar work? Tell us the symptoms, your postcode and any access needs.
Working on an accessible radiator valve with the floor protected. AI-generated service illustration; not a completed Mayfair job.
Example work, explained
Sorting a faulty radiator valve
See the problem, work and checks
The problem
A radiator stays cold, heats unevenly or leaks around its valve. The cause may be the valve, trapped air or circulation elsewhere in the system.
The work involved
The engineer checks the symptom and the system, then carries out the agreed valve repair, replacement or adjustment. A wider circulation fault needs its own investigation.
Checks and next steps
Check the repaired connections for leaks and the radiator's response when the heating runs, including the operation of its controls.
Need similar work? Tell us the symptoms, your postcode and any access needs.
Using a drain camera at an accessible inspection opening. AI-generated service illustration; not a completed Mayfair job.
Example work, explained
Investigating a drain that keeps blocking
See the problem, work and checks
The problem
A blockage returns after clearance, or several outlets drain slowly. Repeating the same clearance may leave an underlying defect unexplained.
The work involved
Establish the accessible drain route and who is responsible, then inspect the agreed runs with a camera where conditions allow. Any clearance needed first is a separate part of the scope.
Checks and next steps
Review the recorded findings, explain any visible obstruction or defect and set out the next step. A camera survey does not itself repair a damaged pipe.
Need similar work? Tell us the symptoms, your postcode and any access needs.
An initial check at a socket; a plug-in tester alone is not a full electrical safety assessment. AI-generated service illustration; not a completed Mayfair job.
Example work, explained
Investigating a faulty socket
See the problem, work and checks
The problem
A socket is unreliable, damaged or no longer supplies power. The fault can be at the fitting or elsewhere on the circuit.
The work involved
The electrician investigates the fault, safely isolates as required and repairs the connection or replaces a suitable fitting where appropriate. Circuit defects are explained before extra work.
Checks and next steps
Carry out the electrical checks appropriate to the work and explain the findings and any further action needed before the affected installation returns to use.
Need similar work? Tell us the symptoms, your postcode and any access needs.
Checking the position and level of a wall-mounted shelf. AI-generated service illustration; not a completed Mayfair job.
Example work, explained
Fitting a shelf that suits the wall
See the problem, work and checks
The problem
A new shelf needs fitting, or an existing one is loose or uneven. The wall construction and intended load determine the right fixing method.
The work involved
Check the wall, concealed-service risks, shelf instructions and intended use. Agree the position, fit suitable brackets and fixings, and make good within the agreed scope.
Checks and next steps
Check the shelf is level and the fittings are secure, then explain the manufacturer's load guidance and any limits of the installation.
Need similar work? Tell us the symptoms, your postcode and any access needs.
Applying wall paint with the surrounding floor and fittings protected. AI-generated service illustration; not a completed Mayfair job.
Example work, explained
Refreshing tired interior walls
See the problem, work and checks
The problem
Scuffs, worn paint or a change of colour can leave a room needing a refresh. Loose paint or damaged plaster affects the preparation needed.
The work involved
Protect the room, prepare sound surfaces, fill agreed minor defects and apply the specified paint system. Damp or significant plaster damage is addressed before decorating.
Checks and next steps
Inspect coverage, edges and the agreed finish, deal with touch-ups and remove protection once the work area is ready. Drying time depends on the product and conditions.
Need similar work? Tell us the symptoms, your postcode and any access needs.
Removing gutter debris from a scaffold platform. AI-generated service illustration; not a completed Mayfair job.
Example work, explained
Clearing leaves from blocked gutters
See the problem, work and checks
The problem
Leaves and debris obstruct the rainwater route, causing a gutter to spill over. A leaking joint or damaged downpipe can cause a similar symptom.
The work involved
Plan safe access, remove debris from the agreed gutter runs and check accessible outlets. Failed joints, damaged sections and specialist access are priced as part of the actual scope.
Checks and next steps
Check the accessible rainwater route and visible joints, report remaining defects and leave the collected debris ready for the agreed disposal arrangements.
Need similar work? Tell us the symptoms, your postcode and any access needs.
Working on a sash cord and the side of a timber window. AI-generated service illustration; not a completed Mayfair job.
Example work, explained
Repairing a sash-window mechanism
See the problem, work and checks
The problem
A sash sticks, feels unusually heavy or will not stay in position. Worn cords, fittings, paint build-up or timber damage need different repairs.
The work involved
The joiner checks the window and agrees a repair suited to its condition, such as replacing a cord or adjusting fittings. Timber restoration, glazing and changes to appearance are scoped separately.
Checks and next steps
Check movement, balance and closing, and explain any remaining timber, glazing or finishing work. The repair should suit the existing window and property requirements.
Need similar work? Tell us the symptoms, your postcode and any access needs.
Comparing moisture readings around a damaged wall surface. AI-generated service illustration; not a completed Mayfair job.
Example work, explained
Finding the cause of a damp wall
See the problem, work and checks
The problem
A damp patch, peeling finish or recurring staining needs a cause established. A meter reading or photograph alone cannot distinguish every source of moisture.
The work involved
Review when the patch appears, nearby plumbing, external defects, ventilation and the building's construction. Agree further investigation and source repairs from the findings.
Checks and next steps
Explain the likely source, any limits of the inspection and the plan for repair and drying. Surface treatment or redecorating is considered once the underlying problem is addressed.
Need similar work? Tell us the symptoms, your postcode and any access needs.
Preparing and making good damaged plaster in a room alcove. AI-generated service illustration; not a completed Mayfair job.
Example work, explained
Making good a damaged plaster wall
See the problem, work and checks
The problem
Loose, blown or damaged plaster leaves an uneven surface that paint cannot reliably cover. The condition of the background matters as much as the visible patch.
The work involved
Once moisture sources and material concerns are addressed, protect the room, prepare the affected area and reinstate the agreed plaster finish with suitable materials.
Checks and next steps
Check the repaired area and its edges, explain drying and decoration requirements, and identify whether painting is included or needs a separate visit.
Need similar work? Tell us the symptoms, your postcode and any access needs.
You can send a mixed job list or describe a product you need. Share your own photos or product references when Mayfair follows up, so the quote reflects your property.
